Complete OBD2 Solution: BMW E-Series

This professional software module is designed for reflashing Bosch engine control units used in BMW E-series vehicles through the diagnostic connector. It provides a full OBD2 solution, eliminating the need to dismount, open, or drill the ECU.

• Virtual Reading and Writing: Allows for identification, virtual reading, and writing of the calibration area directly through the OBD2 port.

• No Hardware Modification: Safely perform all operations without physical intervention in the ECU casing.

• Automatic Checksum Correction: Supports internal verification and correction of checksums during the writing process to ensure software integrity.

---

Supported Engine Control Units

The module provides comprehensive support for a wide range of diesel and petrol Bosch ECUs found in E-series models:

• Bosch EDC17 Series (Diesel):

  • EDC17CP45 (DDE7.3.1)

  • EDC17CP02 (DDE7.1)

  • EDC17C06 (DDE7.0)

  • EDC17CP09 (DDE7.3)

  • EDC17C41 (DDE7.2.1)

  • EDC17C50 (DDE7.0.1)

• Bosch MEVD17 Series (Petrol):

  • MEVD17.2

  • MEVD17.2.6

  • MEVD17.2.9

Technical Note: Virtual reading depends on the availability of the specific file on the BitBox server. Claims regarding the inability to read a file that is not present on the server will not be addressed.

---

Required Hardware for Operation

To utilize this module, the following hardware is required (available at atxtool.com):

• BitSoftware USB Security Dongle: A mandatory Senselock USB key is required to activate and host all BitBox software modules.

• J2534 Pass-Thru Interface: A high-quality J2534 adapter (such as Scanmatik 2, OpenPort 2.0, or Mongoose) is required for stable CAN-bus communication.

• Internet Connection: The software uses a client-server architecture and requires an active internet connection for operation and module activation.